氮含量对HPD-1双相不锈钢组织及力学性能的影响

通过显微组织观察与力学性能测试研究了氮含量(0.08%~0.22％,质量分数)对HPD-1双相不锈钢硬度、拉伸性能、低温冲击性能及疲劳性能的影响。结果表明,氮含量变化可显著影响试验钢γ/α相比例,当氮含量由0.08％升高到0.22％,γ相含量由38.1％提高至56.5％。α相的硬度由273 HV10提高到343 HV10,γ相的硬度由238 HV10提高到299 HV10,试验钢强度明显提升。氮元素对两相比例和奥氏体相韧性的双重影响导致试验钢低温冲击性能呈先上升后下降的趋势;更高的氮含量抑制疲劳裂纹萌生与拓展,是影响HPD-1双相不锈钢室温疲劳性能的主要因素。撕裂棱是疲劳断口的显著特征。     

Social licence: power imbalances and levels of consciousness – two case studies

ABSTRACT

Social licence to operate (SLO) is a term that is finding increasing acceptance in a number of industries. Like all new terms, its precise meaning and implications are still being investigated. Using data from previous studies, this paper offers an analysis of the SLO of two case studies with each study being viewed separately through the grid of a distinct theoretical framework. Case study 1 looks at the development of differential social licence negotiated in the Hamlet of Cambridge Bay, Nunavut, as a result of an impact and benefit agreement negotiated between Tahera Diamond Corp. and the Kitikmeot Inuit Organisation in 2004. The study demonstrates that general acceptance of resource development can be uneven and reflect an unequal distribution of decision-making power. In case study 2, stakeholders of a failed mineral development project were queried across time about the specifics of the proposed mine development and were queried about resource development across different levels of consciousness. Perhaps, SLO is variable across different levels of consciousness. The paper concludes with observations about the variable nature of SLO acceptance across populations and across levels of consciousness within individuals. Perhaps, the concept of SLO is, in fact, complex, difficult to define and measure and, at this point, of limited utility as a measure of resource development acceptance.     

复杂岩基地质海上风电高桩承台基础关键技术研究及应用

本文针对福建海域复杂的地质特点,以岩基海床高桩承台基础为研究对象,对基础的承台选型、承台结构设计进行分析,结合基础的载荷计算、结构的内力建模、基础的实际监测数据,研究表明高桩中承台嵌岩基础满足设计规范要求。同时,以嵌岩基础施工为例,从桩基施工、承台施工2方面详细阐述了基础施工工艺,实践表明,采用打桩架固定式沉桩、整体式嵌岩平台、装配式预制钢套箱工艺可显著提高施工效率,满足工程建设要求。该高桩承台基础设计和施工方案可为东南沿海类似工程提供参考。     

Effects of ethylene-octene copolymer (POE) on the brittle to ductile transition of high-density polyethylene/POE blends

Three kinds of ethylene-octene copolymers (POE) were melt-blended with high-density polyethylene (PE-HD) in different proportions. Detailed characterizations were conducted to analyze their structural differences of POE and its effects in toughening PE-HD. The higher molecular weight POE can improve the toughness of PE-HD. 60:40 PE-HD/POE is elongated to break up to 700% while impact strength is 84.7 kJ/m² at −30°C, which is 21-fold of PE-HD. In the brittle to ductile transition (BDT) during impact, the fracture mechanism changes from the crazing mode to the shear yield-plastic deformation mode. The BDT temperature decreases as the POE molecular weight and its content increase. The interface strength in tension is estimated to access their effects. The Boltzmann-type models were successfully extended to describe the typical S-shaped curves in BDT of notched impact strength vs POE content or temperature. The supplementary decay model is suggested for the attenuation in toughening. Transition map in impact is proposed to select the use range of composition (c ) and temperature (T ) for high toughness. The curves are converted into 3D graph of T -c -impact strength for illustrating their coupling-separate effects, and further into the contour map of impact strength in T -c space for finding their partial equivalence.     

基于功频下垂控制的光伏并网发电系统惯量阻尼机理研究

针对光伏以低惯量、弱阻尼的特征大规模接入电网，给电网稳定性带来不利影响的问题，基于功频下垂控制的光伏并网发电系统，借鉴经典电气转矩分析法，从物理机制层面上分析影响系统惯量、阻尼以及同步能力的作用规律。研究结果表明对于控制参数的影响规律而言，惯量特性主要受功率环的比例系数Kp影响，且随Kp的增大而增强；阻尼特性受频率下垂系数Dp影响比较明显，且随Dp的增大而减弱；同步特性只受功率环的比例积分系数Ki影响，且随Ki的增大而增强。通过仿真验证了理论分析的正确性。     

"人机环管"在煤矿供电安全管理中的应用

制定供电过程中消除安全隐患的针对性措施,可以为矿井安全生产提供必要保障。为探究煤矿供电管理中安全隐患的具体分析方法,首先介绍“人机环管”管理体系的建立过程和核心内容,接着以“人机环管”的管理方法分析了供电管理中的普遍问题。在分析供电管理中的具体问题时,分别得出了“人”“机”“环”“管”4方面的具体措施。分析认为,“人机环管”方法可以有效查找出存在的安全隐患,进而保证煤矿供电系统的安全可靠。     

Multi-objective optimization for efficient modeling and improvement of the high temperature PEM fuel cell based Micro-CHP system

Fuel cells due to different useful features such as high efficiency, low pollution, noiselessness, lack of moving parts, variety of fuels used and wide range of capacity of these sources can be the main reasons for their tendency to use them in different applications. In this study, the application of a high temperature proton exchange membrane fuel cell (HT-PEMFC) in a combined heat and power (CHP) plant has been analyzed. This study presents a multi-objective optimization method to provide an optimal design parameters for the HT-PEMFC based micro-CHP during a 14,000 h lifetime by considering the effect of degradation. The purpose is to optimize the net electrical efficiency and the electrical power generation. For the optimization process, different design parameters including auxiliary to process fuel ratio, anodic stoichiometric ratio, steam to carbon ratio, and fuel partialization level have been employed. For optimization, A new technique based on Tent mapping and Lévy flight mechanism, called improved collective animal behavior (ICAB) algorithm has been employed to solve the algorithm premature convergence shortcoming. Experimental results of the proposed method has been applied to the data of a practical plant (Sidera30) for analyzing the efficiency of the proposed ICAB based system, it is compared with normal condition and another genetic algorithm based method for this purpose. Final results showed that the difference between the maximum electrical power production under normal condition and ICAB based condition changes from 2.5 kW when it starts and reaches to its maximum value, 3.0 kW, after 14,000 h lifetime. It is also concluded that the cumulative average for the normal and the ICAB based algorithm are 24.01 kW and 27.04 kW, respectively which showed about 3.03 kW cumulative differences.     

热处理工艺对15CrMoR钢带状组织和冲击性能的影响

利用光学显微镜、扫描电镜和冲击试验机等仪器研究了15CrMoR钢中带状组织在热处理过程中的演变及其对冲击性能的影响。结果表明:奥氏体化后缓冷会出现铁素体-珠光体带状组织, 快冷则可以抑制带状组织的出现,但快冷会导致粒状贝氏体等非平衡组织形成。粒状贝氏体组织中的贝氏体铁素体基体和马氏体-奥氏体岛在回火过程中逐渐沿Cr、Mo等碳化物形成元素偏聚的区域分解出碳化物,形成富碳化物带,降低钢的横向冲击性能。15CrMoR钢加热到1100 ℃并保温7 h后可消除带状组织,改善钢的横向冲击性能。     

中空夹层金属管混凝土构件侧向冲击试验研究

为提高海洋平台结构的抗冰能力，提出一种新型中空夹层金属管混凝土导管腿构件。通过理论分析、数值模拟和试验相结合，研究不同外钢管材料（Q345钢、奥氏体304级不锈钢和T6061铝合金）对中空夹层钢管混凝土构件的影响。通过单次冲击和连续冲击两种加载方式进行加载，并与钢质空心导管腿进行对比，试验结果发现：组合构件抗冲击性能优于空管构件，铝合金组合构件整体抗冲击能力较差，不锈钢单次冲击作用下极限承载能量高达18.83 kJ以上，小能量连续冲击作用下承载冲击次数最多，不锈钢组合构件抗冲击力学性能最好。结合有限元ABAQUS软件，对单次冲击构件建模并得出计算结果，与试验结果基本吻合。     

公民新闻与权力变移

公民新闻的诞生源于信息网络技术的推动,同时也得力于媒介接近权的付诸实践。结合国内外学者的网络社会学主要研究成果,本文着重探索和分析了媒介权力变移所呈现出来的知识化、扁平化和分散化的趋向,并分析研究了现今阶段公民新闻在媒介权力变移过程的所面临的问题。